1965 Chevrolet Impala 4 door

283 cubic inch V8 motor with original rochester 2 barrel carb. does need to be rebuilt. Does start and run. I have video link on youtube.

Powerglide - Start up from being dead cold

**NEW** Video Full 360 of Impala out of storage, I did get the new tires mounted and balanced2/3/2012 early in the morning. BFGoodrich 205/70r15's

Rebuilt the front end suspension. New tie rods, tie rod sleeves, idler arm, center link, ball joints, sway bar links, shock absorbers, tubular control arms, and all new bushings all poly**(ONLY lower control armswere replaced the upper control arms are still original, BUT I do have the new tubular upper control arms which I will include in sale)**.

Kept the original coil springs, spindles, sway bar, and the upper control arms. I blasted them and painted them with a black epoxy.

NEW disc brakes in front. I bought a conversion kit over the summer came with new rotors, calipers & pads, bearings, break hoses. (manual brakes, NO booster)

I have new tires that I havent put on yet. Will be putting them on soon and having a front end alignment. Will post pictures of new tires when job is done.

Buyer will have to arrange pick up. Although it does start, I would not recommend drivinga long distance. You could do it, But engine likes to kill at stops. Never had it die while moving though.

There is a crack in the front driver side quarter panel(picture), and the passenger side front inner wheel well needs to be replaced.

Please if you have any questions or specific pictures you want taken feel free to message me and I will get to itas soon as possible.

**NEW FRAME** Replaced May, 2011!!! NOT REINFORCED**

COMPLETELY REPLACED!!